Select Page
Generic selectors
Exact matches only
Search in title
Search in content
banner

Individual box dryer

individual box dryer

Drying each box individually to the desired moisture content of the seed.

individual box dryer2

Example installation without boxes

individual box dryer3

Installation partly filled with boxes 

individual box dryer4
Boxes placed in scaffolding in front of drying installation. Box can be placed or taken one’s ready.
individual box dryer5

Extracted air heated and or dehydrated passes through each box individually.

individual1
Drying of an individually box starts when placed in scaffolding and stops automatically when the seed is dry.
individual box dryer7

Measuring air out of seed per box to control.

individual box dryer8
LED-lamps for indication status of drying.
individual2

Example individual box drying with dehydrated air.

A. Box with seed
B. Inlet pallet
C. High pressure fan per box
D. Radiator heater with warm water

 

individual3

Extra option: temperature per box individually

E. Valve for inlet outside air
F. Air-duct and hatch for inlet dehydrated air
G. Valve for inlet inside air (recycling).

Process:

The box is being placed, the fan will start automatically. The fan will speed up till the desired airflow as set for this box has been reached. The drying starts by extracting outside air. When seed starts to dry and outside air is not dry enough, dehydrated air will automatically mix with the outside air till the desired AH as programmed. When air out of the seed becomes dryer than outside air, automatically dry inside air will be extracted.The drying will continue till the air out of the seed has reached the AH as goes with the equilibrium moist content of the seed. At that moment, the slide will slowly close. When closed the seed in this box is dry.